Removal of insulation to include droppings in attic, disinfect attic to kill any bacteria, parasites, or fleas. Blow in r38 cellulose insulation to current standard. Note walk boards in attic to be pulled up and put back down during the cleanup process.

Remove all accessible insulation in attic space. Install baffles at soffit line that are missing and around hvac. Install attic tent over entrance. Air seal with closed cell spray foam any crack, gap, and conduit line. Blow in new cellulose insulation to R49 (14 inches). Blow over existing insulation to reach …

Remove all insulation. Disinfect entire attic and treat with mildew side and fungicide. Weatherstrip and use the zipper seal for attic hatch with ladder. Install baffles to keep insulation in place. Air seal any gaps, cracks or crevices with insulating foam. Blow in all new cellulose insulation to a depth …

Blow over existing insulation with new cellulose insulation to reach levels of 14 inches. Baffles at soffit lines will be replaced and baffles added around the entry door. Insulate entry door with foam board insulation.

Install diamond reflective radiant barrier on the roof rafters. Will be installed starting at the soffit and ending at the ridge vent. Will help radiate heat away from the attic space. Remove the fiberglass insulation in the rim joists in the basement. Spray foam the rim joists with 2 inches of …

Remove all the insulation, fecal matter, and nesting in the main attic space only. (Vaulted section over garage area inaccessible). Sterifab to disinfect and treat for mites, lice, and bacteria. Install new baffles at the soffit lines and around the entry point. Install can light covers over the recess lights. …

Blow in all new cellulose insulation to reach a level of 14 inches. Weatherstrip and insulate attic hatch. Install baffles to keep insulation and proper place

Install baffles at the soffit lines and around the entry point. Blow over existing insulation to reach levels of R49 (14 inches).

Remove all the insulation to include the insulation in the soffit areas. Air seal gaps and conduit lines for better energy efficiency. Install baffles around the entry point and at the soffit lines. Insulate the entry door with foam board insulation and install weather stripping. Blow in cellulose insulation to …

Remove existing blown in insulation. Sanitize attic space as able. Install new blown in to current recommended r-49 level throughout. (Approx 13’). Air seal accessible top plates, gaps and ceiling penetrations 1″ or less with sprayfoam.

Replace section of fallen R11 blanket insulation on basement wall with new R11 blanket insulation with white vapor barrier. Secure to walls with hilty nails. Seam tape the rest of the seams of the existing vapor barrier R11 insulation in the walls of the basement. Seam tape a couple of …

Blow over 5 inches on main attic floor with cellulose. Blow over 3-4 inches on vaulted ceiling area. Apply 2 inches of closed cell foam to wood rail at top corner of vaulted ceiling in attic space to air seal.

Blow cellulose insulation into the attic space above the bedroom over the garage. Currently has fiberglass batted insulation. Summit will add approx 8-10” of blown in cellulose insulation on top of the fiberglass batts to raise the R value to above R-49 (current code). In addition Summit will rake and …

Install baffles as needed or front left and right hand side of empty attic and blow R38 cellulose insulation to current standard. Courtesy treatment for mice around exterior of building.

Replacement of rear window on left side at back of home that has wooden framing on the interior, measurements from outside is a 41 x 43 standard window and new window to be replaced will be a double hung double pane low E window. Color to be white. Need installer to re-measure …