Removal of blown cellulose insulation from main attic only.

Remove flashing and shingles on cricket on chimney on left side of the home. Install new ice/water shield and shingles to match existing as best as possible. (Tamko architectural autumn brown) install new flashing along the chimney. Wrap the rake board on right side of the chimney with brown …

Remove and replace flashing, re-caulk, white. Demo remaining insulation in alcove in basement. Apply sanitizer and vacuum area. Replace blanket insulation in alcove. Seal foundation crack to right of chimney to base of soil with flexible concrete sealant.

Seal under threshold and bottom corners of the French doors with clear caulk on top deck. Seal around light fixture below the deck.

Installed shutters into aluminum siding.

Remove section of shingles, flashing, siding and damaged plywood. Downspout will be removed during the process and will be re installed after work is finished. Install new flashing, ice/water shield, and shingles to match the existing as best as possible. (Tamko three tab black).

Remove old broken chimney crown. Fix loose bricks and install new chimney mortar on chimney crown to prevent leaking. After finished two new chimney caps will be installed over two chimney flues. Remove section of damaged shingles on front side of home indicated by technician. Install new ice/water …

Replacement of roof to include removal and cleanup of old shingles and debris. New roof will include ice and rain shield, new 15 pound underlayment, new flashing as needed around home to include skylights and sealing around the skylights. New drip edge will be put up behind gutter line around home …

Replace weather stripping 95 inches on right door of double garage door (when looking at doors).

Replace fallen rake board on rear right side of home. Wrap both rake boards with metal color to match as best as possible.

49″ width 44″ projection. it is an egress well so it needs to be hinged to allow it to open freely. Add out left and right side with 1 inch pressure treated, may need to do a hinge on each side oh, and add some butyl rubber weather-stripping between the frame and the …

Remove damaged shingles, plywood, and flashing. Install new plywood, ice/water shield, black metal flashing, and shingles to match existing as best as possible.

Blow in 10 inches of cellulose insulation into attic over the garage.

Remove section of shingles, u vent, and damaged plywood. Install new plywood, underlayment, and three tab shingles (Tamko slate tone grey).

Replacement of roof. Removal of debris. Checking of plywood under shingles, if damage is found New underlayment to be installed. New rain/ice shield installed. 2 new roof boots and 750 over exhaust pipes. New drip edge/Critter Guard to be installed. Also new flashing and …